자동차
트럭
버스
모터사이클
군용 차량
전자 기기
무기
건축물
항공기
가구
캐릭터
동물
우주선
음식
선박
더
보기
with highly detailed exterior
추천 서비스: |
format
Solid/CAD/Nurbs 소프트웨어 호환 형식(STEP, CATPART, SAT)으로 모델을 다운로드합니다.
|
format
Solid/CAD/Nurbs 소프트웨어 호환 형식(STEP, CATPART, SAT)으로 모델을 다운로드합니다. $50
|
format
$300
|
format
추가 텍스처링 없이 모델 최적화. 폴리곤의 수를 50k, 20k 또는 3k로 줄일 것입니다.
|
format
모델에서 보이지 않는 과도한 폴리곤을 제거하여 폴리곤 수를 최대 50k까지 줄입니다. $50
|
format
모델에서 보이지 않는 과도한 폴리곤을 제거하여 폴리곤 수를 최대 20k까지 줄입니다. $150
|
format
모델에서 보이지 않는 과도한 폴리곤을 제거하여 폴리곤 수를 최대 3k까지 줄입니다. $300
|
format
모델을 Unity 에셋 패키지로 다운로드합니다. $50
|
format
모델을 Unreal 4 포멧 패키지로 다운로드합니다. $50
|
format
모델 외부의 UV 매핑(페인트 또는 블랙 바디 패널 및 창).
|
format
$50
|
format
$300
|
format
모델에 HD 인테리어를 추가합니다. 클로즈업 렌더 준비가 완료되었으며 필요에 따라 조정할 수 있습니다. $1200
|
format
모델 내부를 위한 UV 매핑. 우리는 효율적인 UV 공간 비용과 편리한 UV 쉘 그룹화에 주목합니다. $100
|
format
$300
|
format
$50
|
format
$300
|
format
개체를 인쇄할 수 있는 STL 파일 형식으로 모델을 다운로드 합니다. $900
|
format
4K 해상도의 투명한 배경에 모델의 기성품 PSD 이미지 10개.
|
format
$50
|
format
$50
|
format
$150
|
format
$50
|
format
안드로이드 및 iOS용으로 준비된 모델과 플레이어가 포함된 AR 키트를 준비하세요. $150
|
자유 형식 변환
모든 맞춤 조정
개발자의 지원
기하학:
Polygonal다각형:
302,000정점들:
309,000기재:
네오픈 소스의 치수를 기반으로 실제 Porsche 차 에 최대한 가깝게 만든 3D 모델.
모든 모델 파일은 "스무딩"되었습니다. 요청 시 매끄럽지 않은 파일을 제공합니다.
모델의 모든 주요 부분은 분리된 개체입니다. 모든 재료를 쉽게 변경할 수 있습니다.
각 모델에 대해 여러 형식을 제공하며 대부분은 기본 포맷으로 사용 가능합니다.
이미지는 V-Ray 플러그인을 사용하여 렌더링되며 조명 및 환경은 세트에 포함되지 않습니다.
nice model overall – I see a few variants in the catalog. All of them have the same issue. The fenders don’t have continuous curvature noticeable at different angles and they’re missing the correct lip and shape. The RS pictured here is not a 72 its in fact a 73 RS. (US) maybe diff in other countries but as an icon known as a 73. sell for 1m + now on the market!.
Re the fender lips there is a bead missing on both front and rear that would be reflected in the light. the torsion spring cover is missing. Key b/c that denotes the diff between a short wheel base and long ( as pictured here) the early 911’s were short wheel base. the torsion hole is closer to the fender. this is a long wheel base. the continuity between the bottom of the door and the rocker panel is not continuous. The bumper corners are most definitely not flat in surface they are curved and rounded (molded in fiberglass) The tire sidewalls should be curved and not flat in surface. The wheels are unique to this year and model depicted. Fuchs were 7″ in the front and 8″ in the rear, appearing with more of a deep dish look as the offsets were different. – anyhow just constructive feedback. fan of your site and love classic pcars. good luck!
nice! :)